Call us at:
Recently Viewed
Reusable Isolation Gown with Carbon Fiber - Level 1, Level 2 Fabric (Case of 72)
Isolation Gowns

Reusable Isolation Gown with Carbon Fiber - Level 1, Level 2 Fabric (Case of 72)


Product only sold by the case (72 gowns per case).
Volume discounts will by applied at checkout.
Click here to view discounts and additional payment options.

Isolation Precaution Gown (NON-Surgical/Infection Prevention/PPE)

Gown: Isolation Precaution Gown (NON-Surgical/Infection Prevention/PPE)

FDA: Meets Class 1 Standards, Fabric Meets Level 1 and Level 2 Standards

Fabric: 100% Monofilament Polyester (99% Poly / 1% Carbon Fiber Stripe)

Fabric: Fluid Resistant with Static Dissipative Woven Stripe

Color: Yellow

Sleeves: Raglan

Cuffs: Woven Polyester Knit Cuffs

Closure: Tie with Self-Fabric

Size: OSFM 45" Center-Back Length X 60” Sweep

Checkbox: 100 Square Grid Printed Block Inside Front

Expected Wear Life: 100 Cycles (Under Normal Healthcare Commercial Laundering)

Case Pack: 72 Each Per Box

Mission Linen’s standard isolation precaution gowns are non-surgical, infection prevention, PPE/personal protective equipment. Made from 100% monofilament polyester fabric (consisting of 99% polyester and 1% carbon fiber, these garments are fluid resistant and static dissipative. Inside the front panel is a 100 box printed check grid, which allows the laundering institution to place an indelible ink checkmark each time the product is cycled. This product is built to last the full 100 wash cycles, if the usage and laundering in within normal healthcare practices. Raglan sleeves provide open comfort in the shoulder and armpits areas, to reduce binding, and woven polyester knit cuffs protect the wearer’s inner garment from being exposed. The product is dressed from the solid front, and the opening in the back, using self-fabric ties for closure. The fit is considered OSFM (one size fits most), and garment measures approximately 45” top to bottom (from center of neck), with a roomy 60” total sweep, fitting most HCW/healthcare workers or patient visitors. These gowns are packed 72 pieces per case.

The product meets all standards for FDA Class 1, Level 1, which is not considered a medical device, and not required to be registered or lab certified. The fabric used is continually tested to meet FDA Level 2 standards, and is considered the standard of the healthcare industry for fluid resistant isolation gowns. It should be understood that this product is not intended for OR operating room or higher risk environments; and is not registered as such.

Add Design

Select Design
Upload New Design
Select Position
Cancel Apply Design
Selected Design
Selected Position
Remove Design Edit Design
Reusable Isolation Gown with Carbon Fiber - Level 1, Level 2 Fabric (Case of 72)
Hover to zoom in on product